For R5500/R5550 and R5700/R5750, the tuning resolution (or min frequency step size) is 10Hz. Detail can be found at "[:SENSe]:FREQuency:CENTer&quo...
Tue, Aug 18, 2020 at 1:17 PM
IBW is dependent on the RFE mode used and they are 100MHz (ZIF mode), 40MHz (SH mode), 10MHz (SHN mode), 50MHz (DD mode), and 100kHz (HDR mode). It can als...
Wed, Jan 13, 2021 at 1:39 PM
ThinkRF uses TCXO.
Tue, Aug 18, 2020 at 12:51 PM
Max +10dBm Min -10dBm
Tue, Aug 18, 2020 at 1:00 PM
Adjustable Pre-amplification is available for -418 and -427. Please refer to this document AppNote: Gain/Attenuation Settings for ThinkRF R5xx0-418 and -427
Tue, Aug 18, 2020 at 1:16 PM
This question is addressed in this article "When to use which attenuation (and gain) setting?".
Wed, Mar 3, 2021 at 3:29 PM
The sweep speed is in excess of 28 GHz/s with a frequency resolution of 10 kHz. So effectively the tuning speed is faster than 3.5 ms because the sweep in...
Tue, Aug 18, 2020 at 5:02 PM
From the power supply end, the connector is Barrel Plug, 2.5mm I.D. x 5.5mm O.D. x 11.0mm
Tue, Apr 6, 2021 at 5:56 PM
For R5550/R5750/R5500 products, ThinkRF spec at 25us for pulse width signal detection (POI). Anything less than 25us may not be detected. Certain span ...
Thu, Apr 8, 2021 at 3:21 PM
The gain setting does not apply to DD mode. Gain settings only apply to the mode above 50MHz for -418 and -427 models.
Thu, Apr 29, 2021 at 2:22 PM