WBIQ FAQs
For the upper receiver section in the image below. When IQ Out is selected, the switch goes to IQ Out. Data no longer goes to the internal Digitizer (lowe...
Wed, Sep 6, 2023 at 9:45 AM
No, the IQ output is not calibrated. ThinkRF WBIQ products, any calibration that’s applied with its internal digitizers would not be valid with the extern...
Thu, Feb 18, 2021 at 11:07 AM
In order to work with ThinkRF WBIQ units, there are certain minimum requirements for the external digitizer. We recommend using the following two GaGe ...
Mon, May 27, 2024 at 6:16 PM
The WBIQ has a wide IF bandwidth that cannot be processed by the on-board Analog-to-digital converter. The WBIQ product is intended for use with external di...
Thu, Feb 18, 2021 at 11:45 AM
From 9kHz to 50MHz is DD mode, DD mode bandwidth is 50MHz and it doesn’t support WBIQ. For all different RFE(radio Front End) modes, Please refer to Tab...
Fri, Mar 12, 2021 at 9:26 PM
WBIQ version with 160MHz bandwidth cannot be processed by the on-board Analog-to-digital converter. It is intended for use with external digitizers only and...
Fri, Mar 8, 2024 at 3:44 PM